Airicist
10th May 2013, 20:37
https://youtu.be/pbZfpN9ij2Y
Dolphin Wave 300 XL - Placing the robot in the pool
Published on May 8, 2013
1. On the MMI, press POOL. The robot starts moving towards the pool and enters
the swimming pool positioning itself on the pool floor.
2. Wait for the Wave screen to appear.
3. In every activation of the robot, it will straighten itself vertically to the wall of the
starting point; the robot will start moving backwards to straighten itself and then
will continue in straight lines.
4. Press Start. "Please select pool length" will appear on the screen.
After 2 seconds the Pool Length Setup screen appears.
5. Using the arrows select the required pool length. Press Set.
6. Press Start. The cleaning session will begin. The factory default settings are
used.
Dolphin Wave 300 XL - Placing the robot in the pool
Published on May 8, 2013
1. On the MMI, press POOL. The robot starts moving towards the pool and enters
the swimming pool positioning itself on the pool floor.
2. Wait for the Wave screen to appear.
3. In every activation of the robot, it will straighten itself vertically to the wall of the
starting point; the robot will start moving backwards to straighten itself and then
will continue in straight lines.
4. Press Start. "Please select pool length" will appear on the screen.
After 2 seconds the Pool Length Setup screen appears.
5. Using the arrows select the required pool length. Press Set.
6. Press Start. The cleaning session will begin. The factory default settings are
used.