Results 1 to 7 of 7

Thread: BITalino, projects and applications with physiological sensors, PLUX - Wireless Biosignals S.A., Lisbon, Portugal

  1. #1

    BITalino, projects and applications with physiological sensors, PLUX - Wireless Biosignals S.A., Lisbon, Portugal

    Last edited by Airicist2; 2nd May 2022 at 15:26.

  2. #2


    Ambulatory ECG Data Acquisition with a BITalino

    Published on May 3, 2014

    This video illustrates the BITalino ECG sensor data quality while walking at normal and fast pace. The reference electrode is placed in the C7 vertebrae region.

  3. #3


    Ambulatory ECG Data Acquisition with a BITalino

    Published on Aug 2, 2013

    BITalino is a low-cost toolkit that allows anyone from students to professional developers to create projects and applications with physiological sensors.

    Out-of-the-box, BITalino already integrates easy-to-use software & hardware blocks with sensors for Electrocardiography (ECG), Electromyography (EMG), Electrodermal Activity (EDA), Accelerometry and Light.

    Imagination is the limit... each individual block can be snapped off and combined to prototype anything you want. You can connect other sensors, including your own custom designs.

  4. #4


    Creating Smart Wearables with Printoo and BITalino

    Published on May 13, 2014

  5. #5


    BITalino Sensors Tour

    Published on Jun 25, 2014

    This video presents an overview of the default sensor blocks included in every BITalino kit.

    Note that in the ECG sensor even though the 3-lead accessory is used, it also works with just the 2-lead accessory.

    Also, pre-gelled and self-adhesive electrodes were used for practicality in shooting the video, but the sensors work with non-gelled and fabric electrodes as well.

  6. #6

  7. #7


    BITalino (r)evolution Shines its LED for the First Time

    Published on Nov 28, 2014

    Our team continues hard at work to make BITalino (r)evolution a reality; in this short segment we show you one of our first working versions.

    Our revised groundless EMG sensor design only requires 2 electrode leads, while preserving the same best-in-class performance (as shown in the video).

    We're now extending our core APIs and OpenSignals software to support BLE, hence the use of our old friend HC-06 Bluetooth module for testing.

    The improved cabling is still cooking as well, reason for which we're also using the Molex Sherlock connectors to interface the electrode leads.

Similar Threads

  1. Seed Robotics LTD, robotic hands, Lisbon, Portugal
    By Airicist in forum Closed and slowdown companies
    Replies: 0
    Last Post: 8th December 2015, 18:59
  2. Institute for Systems and Robotics (ISR-Lisbon), Lisbon, Portugal
    By Airicist in forum Scientific institutions
    Replies: 1
    Last Post: 7th May 2015, 11:56
  3. Replies: 1
    Last Post: 17th November 2014, 00:47
  4. Replies: 0
    Last Post: 17th May 2014, 11:11

Социальные закладки

Социальные закладки

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •