Results 1 to 4 of 4

Thread: Shape memory polymers, Anthamatten Group, Department of Chemical Engineering, University of Rochester, Rochester, New York, USA

  1. #1

    Shape memory polymers, Anthamatten Group, Department of Chemical Engineering, University of Rochester, Rochester, New York, USA


  2. #2


    Shape memory polymers

    Uploaded on May 25, 2010

    Mitchell Anthamatten, Assistant Professor and Scientist at the Laboratory for Laser Energetics, discusses shape memory polymers

  3. #3


    Mitch Anthamatten Explains a Shape-Memory Cycle Involving Strain Induced Crystallization

    Published on Feb 9, 2016

    Polymers that visibly change shape when exposed to temperature changes are nothing new. But a research team led by Chemical Engineering Professor Mitch Anthamatten at the University of Rochester created a material that undergoes a shape change that can be triggered by body heat alone, opening the door for new medical and other applications.

    The material developed by Anthamatten and graduate student Yuan Meng is a type of shape-memory polymer, which can be programmed to retain a temporary shape until it is triggered—typically by heat—to return to its original shape.

    “Tuning the trigger temperature is only one part of the story,” said Anthamatten. “We also engineered these materials to store large amount of elastic energy, enabling them to perform more mechanical work during their shape recovery”

    The findings are being published this week in the Journal of Polymer Science Part B: Polymer Physics.

    The key to developing the new polymer was figuring out how to control crystallization that occurs when the material is cooled or stretched. As the material is deformed, polymer chains are locally stretched, and small segments of the polymer align in the same direction in small areas—or domains—called crystallites, which fix the material into a temporarily deformed shape. As the number of crystallites grows, the polymer shape becomes more and more stable, making it increasingly difficult for the material to revert back to its initial—or “permanent”—shape.

    The ability to tune the trigger temperature was achieved by including molecular linkers to connect the individual polymer strands. Anthamatten’s group discovered that linkers inhibit—but don’t stop—crystallization when the material is stretched. By altering the number and types of linkers used, as well as how they’re distributed throughout the polymer network, the Rochester researchers were able to adjust the material’s stability and precisely set the melting point at which the shape change is triggered.

    Heating the new polymer to temperatures near 35 °C, just below the body temperature, causes the crystallites to break apart and the material to revert to its permanent shape.

    “Our shape-memory polymer is like a rubber band that can lock itself into a new shape when stretched,” said Anthamatten. “But a simple touch causes it to recoil back to its original shape.”

    Having a polymer with a precisely tunable trigger temperature was only one objective. Of equal importance, Anthamatten and his team wanted the material to be able to deliver a great deal of mechanical work as the shape transforms back to its permanent shape. Consequently, they set out to optimize their polymer networks to store as much elastic energy as possible.

    “Nearly all applications of shape memory polymers will require that the material pushes or pulls on its surroundings,” said Anthamatten. “However, researchers seldom measure the amount of mechanical work that shape-memory polymers are actually performing.”

    Anthamatten’s shape-memory polymer is capable of lifting an object one-thousand times its weight. For example, a polymer the size of a shoelace—which weighs about a gram—could lift a liter of soda.

    Anthamatten says the shape-memory polymer could have a variety of applications, including sutures, artificial skin, body-heat assisted medical dispensers, and self-fitting apparel.

  4. #4


    Shape Memory Polymers: Plastic with a Brain, and Some Muscle

    Published on Feb 9, 2016

    Elastic materials are a common part of the everyday experience, but the nylon, spandex or common plastics most of us are familiar with are very different from a specific kind of material being developed in the lab of Mitchell Anthamatten, Associate Professor of Chemical Engineering at the University of Rochester.

    The materials coming out of this lab are called shape memory polymers, and they have chemical properties that allow them to do amazing things. These polymers typically have a permanent state, which is the state they'll always return to after being stretched into what is known as a temporary state. One unique attribute of this particular material is that they can hold their temporary state at about room temperature or below, and return to their permanent state rather quickly, with only a slight increase in temperature. Contact with the temperature of the human body is enough to melt the crystalline structures within the polymer and return them to their permanent state.

    The stored energy is another important capability of this material. This attribute allows these materials to do work as they return to the permanent state, such as lifting a weight or compressing something.

    While shape memory polymers have been around a while, scientists are understanding better ways to make them everyday, and they soon may become a part of the everyday experience, just as many other types of elastic already are.

Similar Threads

  1. Replies: 8
    Last Post: 9th January 2020, 16:03
  2. Replies: 1
    Last Post: 10th January 2018, 08:11
  3. Replies: 3
    Last Post: 13th June 2017, 17:37
  4. Vuzix IWear headset, Vuzix Corporation, Rochester, New York, USA
    By Airicist in forum Virtual reality hardware
    Replies: 2
    Last Post: 8th March 2015, 06:49

Социальные закладки

Социальные закладки

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •